MDD Threaded Cantilever Pins with Retaining-Ring Groove, 3–15 mm
$25.48 USD
DG-CP-5978206359200
MDD Threaded Cantilever Pins with Retaining-Ring Groove
Threaded cantilever pins provide a projecting shaft for compatible rollers, bearings and fixture assemblies. The external mounting thread secures the pin to a tapped support, while the shoulder provides a seating surface. A groove near the shaft end accepts a retaining ring.
22 model options with nominal shaft diameters D from 3 to 15 mm.
S45C carbon steel with black oxide or electroless nickel finish, or unplated SUS304 stainless steel, depending on the model.
Choose the complete model code to match the diameter, shoulder length, shaft length and mounting length.
Price is for one selected pin. Bearings, rollers and mounting assemblies are not included.
A retaining ring is included only with models ending in -ME. Other models are supplied without a retaining ring.
Read the Model Code
Example: MDD12-8A-Y4-F16-E12 identifies series MDD12, size code 8A, shoulder length Y of 4 mm, length F of 16 mm and mounting length E of 12 mm. Size 8A has the same nominal shaft diameter as size 8, with a larger head and width across flats.
D = shaft diameter; Y = shoulder length; F = shaft length from the shoulder to the start of the retaining-ring groove; E = mounting length; M = metric mounting thread; H = head outside diameter; W = width across flats. The projecting shaft length is F + n, where n is the groove-to-tip allowance. All linear dimensions are in millimetres.
For MDD01, MDD02 and MDD06, mounting length E is fixed at 1.5 times the nominal thread size M. For MDD11, MDD12 and MDD16, E is specified in the model code. When Y is 17 mm or greater, the supplier drawing specifies a 15 mm long wrench-flat section.
Specifications
Material
S45C carbon steel or SUS304 stainless steel, by model
Mounting
External metric thread with shoulder
Shaft diameter D
3–15 mm; supplier drawing designation g6
Surface finish
Black oxide, electroless nickel plated or unplated, by series
Included quantity
1 pin; retaining ring only for -ME options
Check the full model, mating thread, bearing bore and available mounting space before ordering. Select the material and finish appropriate for your application. Contact us if you need load ratings, fit verification or a custom dimension; these are not specified by the listed price alone.
Product Photos & Technical Details
Click any image to enlarge it. Photographs show the product series. Select a complete model code for the exact dimensions and finish.
Black finish — MDD series photograph; proportions vary by model.Silver finish — MDD series photograph; proportions vary by model.Black angled view — MDD series photograph; proportions vary by model.Silver angled view — MDD series photograph; proportions vary by model.
Materials & Finishes
Materials, surface finishes and model-series guide.
Engineering Drawings
Original engineering geometry with English explanations. MDF and MDD08 are family references only.
Full Family Dimensions
Full family dimension table. Only model options in the selector are offered for purchase.
Listed Size Reference
Nominal reference dimensions for the listed size codes.
Options & Thread Relief
Retaining-ring options and external-thread relief dimensions.
Manufacturing Reference
Manufacturing equipment photographs supplied with the product information.
Ordering Information
Model selection, included items, product images, shipping and contact information.
Available Models
The model selector shows a dedicated English dimension schematic for each option. Schematics are not photographs or production drawings.