Connect a compatible pneumatic cylinder rod to a guided driven assembly with a female-thread floating joint and mounting flange. The floating connection accommodates limited alignment variation between the rod and the driven part. Choose the complete thread specification and flange dimensions for your assembly.
27 model options, with female metric threads from M10 to M42.
Two-hole rectangular flanges on the listed JAF25, JAF30, JAF32 and JAF40 models; four-hole square flanges on JAF50 and larger listed models.
Black-finished body with a dust-cover design. The supplier identifies the housing material as cast iron.
Price is for one selected floating joint with its flange. The cylinder and driven assembly are not included.
Select Your Model
For example, JAF63-18-150 uses an M18 x 1.5 female thread and a 65 x 65 mm four-hole flange. The final three digits specify thread pitch in hundredths of a millimetre: 100 = 1.0 mm, 125 = 1.25 mm, 150 = 1.5 mm, 175 = 1.75 mm, 200 = 2.0 mm and 300 = 3.0 mm.
Match the cylinder rod's thread diameter and pitch, then check overall height, flange size, mounting-hole pattern and available clearance. The series number alone does not establish cylinder compatibility. Confirm maximum axial load, permitted misalignment and operating conditions for your application before ordering. These limits are not specified by the listed price.
Specifications
Material
Cast iron housing, supplier specification
Connection
Female metric thread
Thread range
M10–M42, model-dependent pitch
Mounting
Two-hole or four-hole flange, by model
Included quantity
1 floating joint with mounting flange
Model selection
Full JAF code, thread pitch and flange dimensions
Product Photos & Technical Details
Click images to enlarge. Series photographs show a JAF63-18-150 example. Each model option has its own English dimension sheet, using the supplied model illustration and a flange schematic.
JAF63-18-150 series photograph. The supplied model determines the dimensions.Actual series product views, including the flange and female thread.Reference drawing symbols for two-hole and four-hole flange arrangements.Listed model dimensions, page 1 of 2. Dimensions in mm.Listed model dimensions, page 2 of 2. Dimensions in mm.Model selection, included item and ordering information.
Available Models
A: overall height; B x L: flange dimensions; T: flange thickness; D: body diameter; C: hole-center spacing; H: width across flats. All linear dimensions are in mm. Model drawings are nominal reference illustrations and are not to scale.
1 inch NPT Stainless steel Double Nipple 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-SH-100N
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical (NPT)
Material
Stainless steel
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Quality of material
Stainless steel 316 (1.4408)
Model
1-part
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 316 (1.4408)
Material quality connection 2
Stainless steel 316 (1.4408)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
1 inch NPT Stainless steel Double Nipple 140 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-ST-100N
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical (NPT)
Material
Stainless steel
Max pressure at 20 °C
140 bar
Fitting features
Hydraulic
Quality of material
Stainless steel 321 (1.4541)
Model
1-part
Shape
Straight
Wrench width
36 mm
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 321 (1.4541)
Material quality connection 2
Stainless steel 321 (1.4541)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
JIC Double Nipple UN 1-5/16 inch-12 (Dash Size 16) x 1 inch NPT Stainless Steel 140bar (1967.0psi). Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
F2EXK
Thread
UN 1-5/16-12 (TV001202)
Thread (smaller)
1 inch
Dash Size
16
Connection type
Inner thread conical (NPT) (EV020237,EV020452)
Material
Stainless steel
Max pressure at 20 °C
140 bar
Fitting features
Reducing (TV000502)
Quality of material
Stainless steel (1.4571)
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel (1.4571)
Material quality connection 2
Stainless steel (1.4571)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
1 inch NPT x G 1 inch Stainless steel Double Nipple 40 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-ST-100NG
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical (NPT) (EV020241,EV020239)
Material
Stainless steel
Max pressure at 20 °C
40 bar
Fitting features
Hydraulic
Quality of material
Stainless steel 321 (1.4541)
Model
1-part
Length
55 mm
Shape
Straight
Wrench width
41 mm
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 321 (1.4541)
Material quality connection 2
Stainless steel 321 (1.4541)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
R 1 inch Stainless steel Double Nipple 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-SH-100R
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical BSP-R
Material
Stainless steel
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Quality of material
Stainless steel 316 (1.4408)
Model
1-part
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 316 (1.4408)
Material quality connection 2
Stainless steel 316 (1.4408)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
R 1 inch Nickel plated Brass Double Nipple 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-BN-100R
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical BSP-R
Material
Brass
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Model
1-part
Shape
Straight
Surface protection connection 1
Nickel-plated
Surface protection connection 2
Nickel-plated
Material connection 1
Brass
Material connection 2
Brass
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
G 1 inch Nickel plated Brass Double Nipple 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-BN-100G
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread cylindrical BSP-G
Material
Brass
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Model
1-part
Shape
Straight
Wrench width
36 mm
Surface protection connection 1
Nickel-plated
Surface protection connection 2
Nickel-plated
Material connection 1
Brass
Material connection 2
Brass
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
G 1 inch Stainless steel Double Nipple 40 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-ST-100G
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread cylindrical BSP-G
Material
Stainless steel
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
40 bar
Quality of material
Stainless steel 321 (1.4541)
Model
1-part
Shape
Straight
Wrench width
36 mm
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 321 (1.4541)
Material quality connection 2
Stainless steel 321 (1.4541)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
JIC Double Nipple M10 X 1 x UNF 7/16 inch-20 (Dash Size 4) Stainless Steel FKM 310bar (4355.5psi). Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
F2EVU
Thread
UNF 7/16-20 (TV001204)
Thread (smaller)
M10 x 1
Dash Size
4
Connection type
Outer thread metric (EV020240,EV020452)
Material
Stainless steel
Seal material
FKM (FPM)
Max pressure at 20 °C
310 bar
Min temperature
-20 °C
Max temperature
200 °C
Fitting features
Reducing (TV000502)
Quality of material
Stainless steel V4A
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel V4A
Material quality connection 2
Stainless steel V4A
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
R 1 inch Nickel plated Brass Double Nipple 3-pieces with Conically sealing 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-BN-100R-C
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical BSP-R
Material
Brass
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Type of sealing
Conical sealing (TV000491)
Model
3-part
Shape
Straight
Surface protection connection 1
Nickel-plated
Surface protection connection 2
Nickel-plated
Material connection 1
Brass
Material connection 2
Brass
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
R 1 inch Brass Double Nipple 3-pieces with Conically sealing 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-B-100R-C
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical BSP-R
Material
Brass
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Type of sealing
Conical sealing (TV000491)
Model
3-part
Shape
Straight
Material connection 1
Brass
Material connection 2
Brass
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
R 1 inch Stainless steel Double Nipple 3-pieces with Conically sealing 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-SH-100R-C
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical BSP-R
Material
Stainless steel
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Type of sealing
Conical sealing (TV000491)
Quality of material
Stainless steel 316 (1.4408)
Model
3-part
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 316 (1.4408)
Material quality connection 2
Stainless steel 316 (1.4408)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
G 1 inch Stainless steel Double Nipple 345 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-ST-100G-I
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread cylindrical BSP-G
Material
Stainless steel
Max pressure at 20 °C
345 bar
Fitting features
Hydraulic
Threaded end seal 1
Inside cone, 60°
Threaded end seal 2
Inside cone, 60°
Quality of material
Stainless steel 321 (1.4541)
Model
1-part
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 321 (1.4541)
Material quality connection 2
Stainless steel 321 (1.4541)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
JIC Double Nipple UN 1-1/16 inch-12 (Dash Size 12) x 1 inch NPT Stainless Steel 140bar (1967.0psi). Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
F2EWS
Thread
UN 1-1/16-12 (TV001385)
Thread (smaller)
1 inch
Dash Size
12
Connection type
Inner thread conical (NPT) (EV020237,EV020452)
Material
Stainless steel
Max pressure at 20 °C
140 bar
Fitting features
Reducing (TV000502)
Quality of material
Stainless steel (1.4571)
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel (1.4571)
Material quality connection 2
Stainless steel (1.4571)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
G 1 inch Stainless steel Bulkhead Double nipple 225 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-M-S-100G-BI
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread cylindrical BSP-G
Material
Stainless steel
Max pressure at 20 °C
225 bar
Fitting features
Hydraulic (EV000448,TV000499)
Threaded end seal 1
Inside cone, 60°
Threaded end seal 2
Inside cone, 60°
Quality of material
Stainless steel (1.4436)
Model
2-part
Length
72 mm
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel (1.4436)
Material quality connection 2
Stainless steel (1.4436)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
Rp 1 inch x R 1 inch F/M Stainless steel Double Nipple 3-pieces with Conically sealing 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
JIC Reducing Nipple UN 1-5/16 inch-12 (Dash Size 16) Male x 1 inch NPT Female Stainless Steel 140bar (1967.0psi). Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
F2FFW
Thread
UN 1-5/16-12 (TV001202)
Thread (smaller)
1 inch
Dash Size
16
Connection type
Outer thread flare (UNF) (EV020452,EV020237)
Material
Stainless steel
Max pressure at 20 °C
140 bar
Fitting features
Reducing (TV000502)
Quality of material
Stainless steel (1.4436)
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel (1.4436)
Material quality connection 2
Stainless steel (1.4436)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
Rp 1 inch x R 1 inch F/M Stainless steel Double Nipple 3-pieces with Flat sealing 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
1 inch NPT x 1 inch NPT F/M Stainless steel Double Nipple 3-pieces with Conically sealing 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-FM-SH-100N-C
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical (NPT)
Material
Stainless steel
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Type of sealing
Conical sealing (TV000491)
Quality of material
Stainless steel 316 (1.4408)
Model
3-part
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 316 (1.4408)
Material quality connection 2
Stainless steel 316 (1.4408)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
R 1 inch x 1 inch NPT M/F Brass Reducing Ring 16 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-MF-B-100RN
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical BSP-R (EV020238,EV020237)
Material
Brass
Max pressure at 20 °C
16 bar
Fitting features
Hydraulic
Model
1-part
Length
50 mm
Shape
Straight
Wrench width
36 mm
Material connection 1
Brass
Material connection 2
Brass
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
R 1 inch x 1 inch NPT M/F Stainless steel Reducing Ring 40 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-MF-ST-100RN
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical BSP-R (EV020238,EV020237)
Material
Stainless steel
Max pressure at 20 °C
40 bar
Fitting features
Hydraulic
Quality of material
Stainless steel 321 (1.4541)
Model
1-part
Shape
Straight
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 321 (1.4541)
Material quality connection 2
Stainless steel 321 (1.4541)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
G 1 inch x 1 inch NPT M/F Brass Reducing Ring 16 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Brass Extension DIN 3523 - 15 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Brass Extension DIN 3523 - 20 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Chromium plated Brass Extension DIN 3523 - 15 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Brass Extension DIN 3523 - 25 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Chromium plated Brass Extension DIN 3523 - 20 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Brass Extension DIN 3523 - 30 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Brass Extension DIN 3523 - 40 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Brass Extension DIN 3523 - 50 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Chromium plated Brass Extension DIN 3523 - 30 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Chromium plated Brass Extension DIN 3523 - 40 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Brass Extension DIN 3523 - 65 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Chromium plated Brass Extension DIN 3523 - 65 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Brass Extension DIN 3523 - 100 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch x 1 inch NPT M/F Stainless steel Reducing Ring 40 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Chromium plated Brass Extension DIN 3523 - 100 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 inch F/M Stainless steel Reducing Adapter 150 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1/2 inch F/M Brass Extension DIN 3523 - 40 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1 1/4 inch x G 1 inch F/M Brass Reducing Ring 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
G 1/4 inch F/M Stainless steel Extension 40 Bar - 18 mm. Check the thread standard, dimensions and material against your installation requirements before ordering.
R 1/8 inch x 1/8 inch NPT M/F Brass Reducing Ring 16 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2S-MF-B-018RN
Thread
1/8 inch
Thread (smaller)
1/8 inch
Connection type
Outer thread conical BSP-R (EV020238,EV020237)
Material
Brass
Max pressure at 20 °C
16 bar
Fitting features
Hydraulic
Model
1-part
Length
25 mm
Shape
Straight
Wrench width
14 mm
Material connection 1
Brass
Material connection 2
Brass
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
1 inch NPT Stainless steel 90 deg Elbow Fitting 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2E-F-SH-100N
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Inner thread conical (NPT)
Material
Stainless steel
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Quality of material
Stainless steel 316 (1.4408)
Model
1-part
Shape
Elbow
Bend angle
90 °
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 316 (1.4408)
Material quality connection 2
Stainless steel 316 (1.4408)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
1 inch NPT x 1 inch NPT F/M Stainless steel 90 deg Elbow Fitting 16 Bar. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2E-FM-SH-100N
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Outer thread conical (NPT)
Material
Stainless steel
Min pressure difference
0 bar
Min pressure
0 bar
Max pressure at 20 °C
16 bar
Quality of material
Stainless steel 316 (1.4408)
Model
1-part
Shape
Elbow
Bend angle
90 °
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 316 (1.4408)
Material quality connection 2
Stainless steel 316 (1.4408)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.
1 inch NPT Stainless steel 90 deg Elbow Fitting 140 Bar - Hydraulic. Check the thread standard, dimensions and material against your installation requirements before ordering.
Specifications
Model / SKU
FL2E-F-S-100N
Thread
1 inch
Thread (smaller)
1 inch
Connection type
Inner thread conical (NPT)
Material
Stainless steel
Max pressure at 20 °C
140 bar
Fitting features
Hydraulic
Quality of material
Stainless steel 316 (1.4401)
Model
1-part
Shape
Elbow
Bend angle
90 °
Material connection 1
Stainless steel
Material connection 2
Stainless steel
Material quality connection 1
Stainless steel 316 (1.4401)
Material quality connection 2
Stainless steel 316 (1.4401)
Custom Requirements
Can’t find the size you need? Send us your drawing for a custom-made solution.